manualshive.com logo in svg

Matrix simado gfx11, System Manual, Page: 41 / 88

Share
Download
Matrix simado gfx11 System Manual Download Page 41

Matrix SIMADO GFX11 System Manual

35

Software Version and Revision Display

You can view the version-revision of the software, currently installed in SIMADO GFX11, on the LCD display of the 
telephone connected to the FXS Port. To be able to view the current firmware version-revision, the telephone 
connected to the FXS Port must have a display. The CLI Type configured on the FXS Port should be either DTMF 
or FSK. For instructions on configuring the CLI Type, see 

“FXS Port Parameters”

.

How to view Software Version-Revision

•

Enter SE Mode.

•

To view current software version/revision of SIMADO GFX11, dial:

109-#*

You will get confirmation tone.
Go On-Hook.
Version-Revision of the software will be displayed on the LCD of your telephone.

When the CLI type set on the FXS Port is 

FSK

, the format of display would be as under:

Where,
VV/XX= Software Version and RR/YY= Software Revision

Example:

If software version is 03 and software revision is 02 the display would be as under:

When CLI type set on the FXS Port is 

DTMF

, the format of display would be as under:

•

Exit SE Mode.

VVRR
VXXRYY

0302
V03R02

0302

Summary of Contents for simado gfx11

























































































Reviews:

No comments