Matrix simado gfx11, System Manual, Page: 67 / 88

Matrix SIMADO GFX11 System Manual 61
b.
The 'Automatic Number Translation' table should be configured as given below:
c.
The call proceeding tone option should be configured as Network tone. SIMADO GFX11 supports the
following Call Proceeding tones,
• Network Tone: The system connects the caller to the network after dialing the Calling Card
Number. The tones played by the Network are heard by the caller till the destination answers the
call.
• Pseudo Network Tone: The system plays a tone by itself after dialing the Calling Card Number till
all the digits are dialed out.
• Silence: The system plays silence after dialing the Calling Card Number till all the digits are dialed
out.
• S Ring Back Tone: The system plays silence after dialing the Calling Card Number for
some time and then plays Ring Back tone till all the digits are dialed out.
With the above configuration in place, whenever a customer at the PCO dials the number 00449652324256, the
call will be processed as follows:
• SIMADO GFX11 plays Call Proceeding Tone to the caller (customer). You can set the type of call
proceeding tone you want to be played to callers. Here, Network Tone is set.
• SIMADO GFX11 will check the ANT table. Since Substitute Number String is same as Dialed Number
String, no number translation will take place.
• Next, the system will check the Calling Card Services Number Index and fetch the mobile number of
the GSM Port of the PBX at location which is configured in the Calling Card services Number table. The
system will make a call to this mobile number.
• When the call lands on the GSM Port of the PBX at location B, the PBX will answer the call, as the
GSM Port is configured in DID/DISA mode.
• SIMADO GFX11 will check the Calling Card Password index configured in the ANT table, and will fetch
the DISA Login code, the extension number and password string. It will dial this number string.
• After that, the system dials out the string configured as the Substitute number in the ANT table, and
finally the destination number dialed by the customer.
• The call is made to the destination number.
If the 'Calling Card Services Number string' in the ANT table is configured as '0' then only ANT logic shall
be applied and the multi-stage dialing will not work. Also, the Calling card password shall not be dialed as
it shall not be applicable in this case.
Index
Dialed Number
String
Substitute Number
String
Calling Card Services
Number Index
Calling Card
Password Index
1 0044 0044 1 1
2
3
4
5
6