Matrix simado gfx11, System Manual, Page: 47 / 88

Matrix SIMADO GFX11 System Manual 41
• While configuring DTMF Digits in the number string, if you dial any code other than those given in the
table, the system will play error tone.
• The maximum number of digits you can configure in the Number string is 16. The system considers
each DTMF character (see above table) that you include in the Number string as two digits. So, DTMF
characters you include in the Number String will use up more digit length than the numeric DTMF digits.
• In the Dialed Number String, you can configure Any Digit code (#8) as the first digit only.
• To clear the Dialed Number String, dial:
291-Number Index-#*
• To configure the Substitute Number String, dial:
292-Number Index-Substitute Number String-#*
Where,
Number Index is from 1 to 6.
Substitute Number String can be of maximum 8 characters. Acceptable digits and characters are 0-9, #, *,
A, B, C, D, F, P and +
If you are configuring DTMF Digits and characters, refer the table given in the previous command for the
codes for each DTMF digit.
Default: Blank
• To clear the Substitute Number String, dial:
292-Number Index-#*
• To configure the Calling Card Service Number Index, dial:
293-Number Index-Calling Card Service Number Index-#*
Where,
Number Index is from 1 to 6.
Calling Card Service Number Index is from 0 to 2.
Default: 0
• To configure the Calling Card Password Index, dial:
294-Number Index-Calling Card Password Index-#*
Where,
Number Index is from 1 to 6.
Calling Card Password Index is from 0 to 2.
Default:
0
• To clear all the entries from Automatic Number Translation table, dial:
290-0-#*
If you are not using the ANT table for “Multi-Stage Dialing” , configure ‘0 ’ as the Calling Card Service
Number Index and the Calling Card Password Index in the ANT table.
• Exit SE Mode.