Matrix simado gfx11, System Manual

Page: 73 / 88

Matrix SIMADO GFX11 System Manual 67
Short Messaging Services (SMS)
Using Short Message Service (SMS), you can receive text messages on SIMADO GFX11. Short Messaging
Service of SIMADO GFX11 notifies you of the receipt of a new message in the form of a signal or alert on the
telephone connected to the FXS Port.
The received messages are stored at various locations in the memory of the SIM Card. The locations where the
messages are stored are referred to as indexes. You can read the received messages if your telephone supports
FSK CLI Type. After reading the messages, you can also delete them.
How to configure
• Enter SE Mode.
• To enable/disable the notification of SMS, dial:
203-Flag-#*
Where,
Flag is
0 for Disable
1 for Enable
Default: Disabled
• Exit SE Mode.
How to Read the message
• Lift the receiver of telephone connected to SIMADO GFX11.
• Dial #*-21-Index. Index is the location where the SMS is stored. Index is from 001 to xxx, where, xxx is the
maximum SMS capacity of the SIM Card.
For example, if the SIM Card can store maximum 100 messages then range of index will be 001 to 100.
• Go On-Hook.
• You will get ring followed by first 16 characters of the message received.
• Again you will get ring followed by next 16 characters of the message received. This will continue till the
whole message is completed.
• If you go Off-Hook during SMS retrieving process SMS retrieval is aborted and you will get dial tone.
How to Delete the message
• Lift the receiver of telephone connected to SIMADO GFX11.
• Dial #*22-Index.
• You will get Confirmation Tone.
• Go On-Hook.