Matrix SETU VFX44L, System Manual

Page: 113 / 195

Matrix
113 SETU VFX88L
/
VFX44L V1
System Manual
Network Port Parameters
What’s this?
• This chapter describes how to configure basic SIP settings and
some of the advanced SIP and RTP parameters. For example,
Static IP Address, Quality of Service (QoS) etc.
• You can set only ‘IP address and subnet mask of Network port’
using Web Jeeves as well as conventional phone instrument. Other
parameters can not be programmed using conventional Phone.
•
Default static IP address of Gateway is 192.168.001.156.
• This Network port will be connected to the LAN Switch/Hub/Router/
Broadband modem.
• Change the IP address of the Network port when connected to
LAN of the organization as per LAN addressing scheme. The LAN
might be using static addresses or dynamic addresses. If static
addresses are used, get the static address of the Network port
from the LAN administrator and program it as the IP address for the
Network port of Gateway. Refer chapter Getting Started.
• If DHCP server is used in the LAN, then enable DHCP server for
the Network port. Doing so, the DHCP server in the LAN will assign
an IP address dynamically to Network port of the Gateway
whenever Gateway is restarted. This IP address assigned
dynamically to the Network port of Gateway by the DHCP server
can be known from the Web page of Network parameters.
• Refer topic ‘Programming using Conventional Phone’ for
programming Network IP Address through Conventional phone.
How to program?
• Refer VFX88L
/
VFX44L Web Jeeves.
• Click on ‘
Network Port Parameters
’.
Notes:
• If Connection Type = DHCP, followings fields will be non-
programmable:
• PPPoE User ID
• PPPoE User Password
• IP Address
• Subnet Mask