Matrix SETU VFX44L, System Manual

Page: 121 / 195

Matrix
121 SETU VFX88L
/
VFX44L V1
System Manual
VFX88L
Internet
3001
3002
192.168.1.15
202.197.69.54
Router
Router
VLAN
Services
Mumbai Office
VFX88L
2001
2002
Chennai Office
5070 (SIP
Listening Port)
How it works?
• Peer-to-Peer table is used in the gateway while making a call from
FXS port to SIP Account i.e. when destination is SIP Account and
not for SIP Account to FXS port call routing.
• The table consists of Number, Destination Address, Destination
port and Name field for each entry.
• If the destination port is found to be a Non-Proxy SIP Account, then
dialed number is matched with the entries in the Number field in the
Peer-to-Peer
table. The system will use the Number of best match
found for making Peer-to-Peer call.
• The Destination address and Destination port corresponds to the
address and SIP listening port, of the gateway to which the call has
to be made.
• Thus, while making Peer to Peer call, gateway uses the Destination
Port as programmed in the P2P-Table. But, while receiving the call,
the gateway uses the SIP listening port as programmed in the Web
page ‘Network Port Parameters’.
How to program?
• Refer VFX88L
/
VFX44L Web Jeeves.
• Click on ‘
Peer-to-Peer Dialing
’. Program maximum 500 entry as
required. First entry is for No match found case.
•
Number:
Enter here the number of maximum 24-digits with blank,
0-9, *, #.
•
Destination Address:
Program the Public IP Address of the peer
gateway. The address of maximum 40 ASCII characters.
By
default, Blank
.
•
Destination Port:
Program the SIP listening port of the peer
gateway. Range is 1024 to 65335 (Blank is not allowed).
By