Matrix SETU VFX44L, System Manual

Page: 55 / 195

Matrix
55 SETU VFX88L
/
VFX44L V1
System Manual
destination port for all the calls, for which report is required. Range
is 1-8.
Call Terminated on SIP Accounts
• Enter the SIP Account number range (from and to), which are the
destination port for all the calls for which report is required. Range
is 1-9.
Calls Made between Dates:
• Enter from which date to which date report is required in format:
DD-MM-YYYY. For example, you may need report from 2-10-06 to
2-10-06 dates. Then enter: 02-Sep-2006 to 02-Sep-2006. ‘To’ field
will be programmed for current date of the system.
Calls Made between Times:
• Enter from which time to which time report is required, in the format
HH:MM. This time is the time recorded in report for each call.
Called Party Number Matching with Number List
• Enter the Called party Number List-Number for which report is
required. List number range is 01-16. Enter Called party list number
in the box.
Calling Party Number Matching with Number List
• Enter the Calling party Number List-Number for which report is
required. List number range is 01-16. Enter Calling party list
number in the box.
Call Duration Greater than Seconds:
• Get report of all calls of specific duration. Range is from 0001 to
9999 seconds. For example, if you need report for all calls which
were of 300 seconds duration. Then, enter here 0300.
Important Points:
• Numbers stored are not the Numbers after applying the ANT logic.
• CDR filters are applicable only for CDR report and not for storing a
call record.
• Call Billing information is not supported.
• Scheduled Report Generation is not supported.