Matrix SETU VFX44L, System Manual

Page: 37 / 195

Matrix
37 SETU VFX88L
/
VFX44L V1
System Manual
is dialed out if ANT is
‘Enabled’
on the destination port.
• If ANT is
disabled
on the destination port, then the number in the
Dialed Number List is dialed without any modification
• If the dialed number string doesn’t matches with any number of the
number strings in the Number list (Dialed Number String) assigned
to the destination port, same number string without any modification
is dialed.
• ANT is not applicable on the Emergency numbers.
• Blank number cannot be replaced by number through ANT logic.
How to program?
Refer VFX88L
/
VFX44L Web Jeeves Pages.
• Click on ‘Number List’ to program both types of number-Lists and
remember those List Numbers.
• Click on SIP Account Parameters-2
.
• Apply: Click here to disable the feature.
Default = enabled
.
• Dialed Number List; Enter the list number programmed previously.
Range = 01-24,
Default = 04
.
• Substitute Number List; Enter the list number programmed
previously. Range = 01-24,
Default = 05
.
Example1:
• For the above example given in the Introduction:
• Program *123 number string in the number list say 01, Index 01
and assign this number list as Dialed Number List.
• Program *777 number string in the number list say 02, Index 01
and assign this number list as Substitute Number List.
• Thus, when the user dials the number *1235678, this number will
be replaced by *7775678 through ANT logic and will be dialed out.
Example2:
• In Peer-to-Peer Calling this can be used for stripping off the prefix
digit. For e.g. User dials the UK number as 0044-XXX where XXX is
number. But ITSP requires only 44 for UK number dialing. Thus, 00
can be stripped off from the number string to be dialed from the
gateway.
• The string ‘44’ is programmed in ‘Substitute Number List whereas
‘0044’ is programmed in ‘Dialed Number List’.