manualshive.com logo in svg

Matrix SETU VFX44L, System Manual

Share
Download
Matrix SETU VFX44L System Manual Download Page 19

Matrix

19

SETU VFX88L

/

VFX44L V1

System Manual

Getting Started

Overview

• This chapter explains how VFX88L can be configured and used.

Similarly VFX44L can also be used.

• The Matrix Gateway VFX88L allows you to use the analog

telephone to make phone calls over the Internet.

This chapter gets the Gateway up and running quickly. The details
which we have skipped to make this brief can be found elsewhere in
the manual. It is divided into four sections:
1. Getting to know the Gateway.
2. Instruction for connecting the Gateway.
3. Basic steps for configuration.
4. Making phone calls.

Getting to Know the Gateway

The Matrix Gateway‘s ports are located on side panel and LEDs are
on front panel. Both are explained below:
• Left Side panel ports.
• Right Side panel LEDs.

Left Side Panel Ports:

Following picture shows how the ports are connected to various
interfaces

:

Summary of Contents for SETU VFX44L




































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands