18
9.3 eCb RePlACeMeNT
CHAPTeR 9: PARTS RePlACeMeNT gUIDe
1) Remove the 3 screws holding right covert to the frame (Figure A).
2) Remove the 3 screws holding left covert to the frame (Figure B).
3) Remove the spring (Figure C).
4) Remove the 2 screws holding the ECB to the frame (Figure D).
5) Remove the tension wire (Figure E).
6) Before fixing the 2 screws of ECB, please make sure the flywheel is in middle of the 2 magnets (Figure F).
fIgURe C
fIgURe D
fIgURe A
fIgURe b
fIgURe e
fIgURe f
