27
9.7 fly wHeel SeT RePlACeMeNT - CoNTINUeD
CHAPTeR 9: PARTS RePlACeMeNT gUIDe
6) Tighten the fly wheel screws to 400kgf-cm (Figure E).
7) When the belt pulley set is fixed, put the belt installation tool on the pulley, turn the pulley until the belt is installed (Figure F & G).
Note: Please refer to 9.6 for installation steps.
8) Install the ECB set as outlined in Section 9.3 (Figure H).
fIgURe f
fIgURe g
fIgURe e
fIgURe H
