Matrix ETERNITY GE, Quick Start Manual

Page: 62 / 124

56 Matrix ETERNITY Quick Start
• Click Submit to save changes.
• Now, to load the country-specific default settings, click the Default the System
link.
• You will get an alert that default values will be assigned and ask you if you want
to continue.
• Click OK .
• On the prompt: “Enter reverse SE password”, enter the password and click OK .
• The system will load the country-specific default settings.
• Wait for the system to restart.
• Log onto Jeeves again, and continue your configuration tasks.
Emergency Numbers
• Click the Emergency Number link.
• The first five entries of Emergency Number table are non-editable. The system
loads the default Emergency Numbers for a country as per the ‘Region’ you
selected in the first five fields of this table. You can only assign the Outgoing
Trunk Bundle Group to route these numbers.
• If you do not find the Emergency Numbers of your region on this table, program
the numbers at any index on this table from 6 to 10 and assign an Outgoing
Trunk Bundle Group to route the numbers.
• Make sure that trunk lines programmed in the Outgoing Trunk Bundle Group
assigned for Emergency Number, are capable of routing the emergency
numbers.
Enterprise Name
• Click the System Parameters link.
• Enter the name of the Enterprise/Organization using ETERNITY. The name may
be up to a maximum of 80 characters. You may also add the contact address
line, if desired.
• Click Submit to save changes to this page.