Matrix ETERNITY GE Quick Start Manual Download Page 45

Page: 45 / 124

Matrix ETERNITY Quick Start

Use the Down/Up key to view the status of the various network parameters. The
status of the following parameters appear on your display as you scroll.

•

MAC:

This is the

MAC Address of the phone.

•

IP:

The current IP Address assigned to the phone.

•

MASK:

The current Subnet mask assigned to the phone.

•

GW:

The current

Gateway IP Address assigned to the phone.

•

DNS:

The Domain Name Server address assigned to the phone.

•

S. ADD:

The IP Address or Dynamic DNS Domain Name of the Master

Ethernet Port of ETERNITY.

•

S. PORT:

The Web Server Port of the Master Ethernet Port of ETERNITY.

•

DOMAIN:

The Domain

Name assigned to the phone.

•

FIRM:

The version of the current Firmware of the phone.

Summary of Contents for ETERNITY GE





























































































































Search results

Summary of Contents for ETERNITY GE

Reviews:

Related manuals for ETERNITY GE

Brands by name

Popular brands

Matrix ETERNITY GE, Quick Start Manual

Search results

Summary of Contents for ETERNITY GE

Reviews:

Related manuals for ETERNITY GE

Brands by name

Popular brands