Matrix ETERNITY GE Quick Start Manual Download Page 52

Page: 52 / 124

Matrix ETERNITY Quick Start

•

If you want to use FTP to upgrade Software of the VMS Card, upload recorded
voice messages, store Back-up of Configuration files and Mailbox messages,
connect the Ethernet port of the VMS card to a standalone PC or a PC on LAN.

•

Plug in one end of the Ethernet cable supplied with the card into
the Ethernet Port of the VMS Card.

•

Plug the other end of the cable into the Ethernet port of a standalone
PC or into a LAN Switch.

When you connect the VMS Card to a to a LAN PC, you need to make sure that

•

The IP Address of the Ethernet Port of the VMS Card and the Ethernet Port of the LAN PC are
not the same.

•

The Ethernet Port of the VMS Card and the Ethernet Port of the PC are in the same Subnet.

Summary of Contents for ETERNITY GE





























































































































Search results

Summary of Contents for ETERNITY GE

Reviews:

Related manuals for ETERNITY GE

Brands by name

Popular brands

Matrix ETERNITY GE, Quick Start Manual

Search results

Summary of Contents for ETERNITY GE

Reviews:

Related manuals for ETERNITY GE

Brands by name

Popular brands