41
40
CHAPTER 9: PART REPlACEMENT gUIdE
9.1 SIdE CoVER REPlACEMENT
1) Turn off power and disconnect the cord from the machine.
2) Pull up on the Control Zone carefully (Figure A).
3) Unplug the wire connector from the Control Zone and remove the Control Zone from the unit (Figure B).
4) Remove the 3 screws and remove the small Matrix logo cover at the top of the stairs (Figures C & D).
fIgURE A
fIgURE b
fIgURE C
fIgURE d
CHAPTER 9: PART REPlACEMENT gUIdE
9.1 SIdE CoVER REPlACEMENT - CoNTINUEd
5) Rotate the 2 plastic clips counter-clockwise to remove the Matrix logo cover (Figures E & F).
6) Remove the 4 screws holding the side cover to the frame and pull up on the side cover to remove it (Figures G & H).
7) Reverse Steps 1-6 to install a new side cover.
fIgURE H
fIgURE g
fIgURE E
fIgURE f
