9
Table of contents
1. Safety instrucions and warnings
2. Description of symbols
3. Machine components
4. Proper usage
5. General safety instructions
6. Special safety instructions
7. Operation
8. Repairs and disposal
9. Maintenance and care
10. Technical data
11. Repairs
12. Environmental protection
1. Safety instructions and warnings
Please read this operating manual completely
and carefully before use.
Before you use the device, for your own safety
you should check whether the correct voltage is
available and whether all handles and parts are
securely fitted.
If you have any questions or are unsure of how
to handle the device, please contact your dealer.
Keep this operating manual in a safe place.
2. Description of symbols
Pay attention to all the signs and symbols shown
in these instructions and on your tool. Make a
note of these signs and symbols. If you interpret
the signs and symbols correctly, your work with
the machine will be safer and better.
Attention!
Please read operating instructions.
Wear safety goggles.
Wear ear protection.
Wear breathing apparatus.
Wear good quality, strong gloves.
3. Machine components (B1)
1 ON/OFF switch
2 Handle
3 Spindle lock
4 Angle stop
5 Scale for stop rail angle
6 Cutting depth adjustment knob
7 Securing knob for angle adjustment
8 Securing knob for height adjustment
9 Height adjustment
10 Scale for height adjustment
11 Base plate
12 Extractor connection for dust bag
13 Dust bag
14 Motor base plate
4. Proper usage
•
The biscuit jointer is designed for cutting
grooves for connections with flat dowels in solid
wood, plywood, particle board, fibreboard, acry-
lic glass and Keene’s cement.
•
The manufacture assumes no liability whatsoe-
ver for improper use or if the machine has been
tampered with.
•
Give equal attention to the safety instructions,
assembly and operating instructions as well as
prevailing accident preventions regulations.
5. General safety instructions
Some basic safety precautions must be
observed for using electric tools to reduce the
risk of fire, electric shock and injury. These
precautions include those set out below. Read
these instructions before using this product and
keep the manual in a safe place.
1. Keep your workplace clean. Untidiness at the
workplace can cause accidents.
2. Take care of the area around where you are wor-
king. Do not allow the electric tools to become
wet and do not use it in wet or damp areas.
Provide good lighting at the workplace. Do not
use any electric tools if there is a risk of fire or
explosion.
3. Protection from electric shocks. Avoid physical
contact with earthed surfaces (for example
pipes, fans, ovens and coolers).
4. Keep children away from the area. Do not allow
onlookers to touch the tool or the extension
cable. Keep all onlookers away from the work-
place.
GB
Summary of Contents for 120.500.060
