Matco Tools MT2613 Manual Download Page 2

Page: 2 / 20

MT2613 2 06/22/18

MT2613 AIR BELT SANDER 3/8"-13"

THIS INSTRUCTION MANUAL CONTAINS

IMPORTANT SAFETY INFORMATION.
READ THIS INSTRUCTION MANUAL CAREFULLY

AND UNDERSTAND ALL INFORMATION BEFORE

OPERATING THIS TOOL.

• Read and understand all instructions. Failure to follow

all instructions listed below, may result in electric

shock, fire, explosion and/or serious personal injury.

It is the responsibility of the owner to make sure all

personnel read this manual prior to using the tool. It is

also the responsibility of the tool owner to keep this

manual intact and in a convenient location for all to

see and read. If the manual or product labels are lost

or not legible, contact Matco Tools for replacements.

If the operator is not fluent in English, the product

and safety instructions shall be read and discussed

with the operator in the operator's native language by

the purchaser/owner or his designee, making sure that

the operator comprehends its contents.
• Always operate, inspect and maintain this tool in

accordance with American National Standards Institute

Safety Code of Portable Air Tools (ANSI B186.1) and any

other applicable safety codes and regulations.
• For safety, top performance and maximum durability of

parts, operate this tool at 90 psig; 6.2 bar max air

pressure with 3/8" diameter air supply hose.
•

Always wear impact-resistant eye, face

and hand protection when operating or

performing maintenance on this tool (users and

bystanders).
• High sound levels can cause permanent hearing loss.

Always use hearing protection as recommended by your

employer an OSHA regulations while using this tool

(users and bystanders).
• Keep the tool in efficient operating condition.
• Operators and maintenance personnel must be

physically able to handle the bulk, weight and power of

this tool.
• Air under pressure can cause severe injury. Never direct

air at yourself or others. Always turn off the air supply,

drain hose of air pressure and detach tool from air supply

before installing, removing or adjusting any accessory

on this tool, or before performing any maintenance on

this tool. Failure to do so could result in injury. Whip

hoses can cause serious injury. Always check for

damaged, frayed or loose hoses and fittings, and replace

immediately.

Do not use quick detach couplings at tool.

  See instructions for correct set-up.
•  Keep tool out of reach of children.
•  Air powered tools can vibrate in use. Vibration, repetitive

motions or uncomfortable positions over extended

periods of time may be harmful to your hands and arms.

Discontinue use of tool if discomfort, tingling feeling or

pain occurs. Seek medical advice before resuming use.
• Slipping, tripping and/or falling while operating air

tools can be a major cause of serious injury or

death. Be aware of excess hose left on the walking

or work surface.
• Keep body working stance balanced and firm. Do

not overreach when operating the tool.

• Place the tool on the work before starting the tool. Do not

  point or indulge in any horseplay with this tool.
•  Note direction of rotation BEFORE operating this tool.
•  Anticipate and be alert for sudden changes in motion

during start up and operation of any power tool.
• Do not carry tool by the hose. Protect the hose from

sharp objects and heat.
• Tool shaft may continue to move briefly after throttle is

released. Avoid direct contact with accessories during

and after use. Gloves will reduce the risk of cuts or

burns.
• Keep away from moving end of tool. Do not wear

jewelry or loose clothing. Secure long hair. Scalping

can occur if hair is not kept away from tool and

accessories. Choking can occur if neckwear is not

kept away from tool and accessories.
• Do not use (or modify) the tool for any other purpose

than that for which it was designed without consulting

  the manufacturer's authorized representative.
•  Use accessories recommended by Matco Tools.
•  Do not lu bri cate tools with flam ma ble or vol a tile liq uids

  such as ker o sene, die sel or jet fuel.
•  This tool is not insulated against electric shock.
•  This tool must not be used in explosive atmospheres.
• Servicing and repairs should only be made by an

  authorized service center.
•  Do not force tool beyond its rated capacity.
•  Do not remove any labels. Replace damaged labels.
•  Failure to heed these warnings may result in serious or

fatal personal injury and/or property damage.

FAILURE TO OBSERVE THESE WARNINGS COULD RESULT IN INJURY

WARNING

WARNING:

This product can expose you to chemicals including

nickel which is known to the State of California to cause cancer

and birth defects or other reproductive harm. For more

information go to www.P65Warnings.ca.gov.

ADVERTENCIA:

Este producto le podrá exponer a ciertos

químicos, para incluir el níquel, conocidos en el Estado de

California por ocasionar cáncer y defectos congénitos u otros