Matco Tools MCL20G Operating Instructions Manual Download Page 7

MCL20G 

rev. 02/22/19

MCL20G 20V

+

 BRUSHLESS 41/2" ANGLE GRINDER

MATCO MCL20G TOOL

 

Matco warrants this tool for a period of 2 years to the 
consumer . We will repair/replace at our discretion any tool that 
is found to be defective during the warranty period . In order 
to have your tool repaired, return the tool to any of Matco 
authorized warranty centers listed, freight prepaid . Please 
include a copy of your proof of purchase and a brief description 
of the problem . The tool will be inspected and if any part or 
parts are found to be defective Matco will repair/replace under 
warranty .
Defective products must be returned and analyzed by VIS Repair 
and Service for the United States or HT Pneumatic Rebuilders 
for Canada, at the addresses listed below, freight prepaid . Any 
tool that has been serviced by the user or by an unauthorized 
service center will subsequently void the warranty of the tool . 
This warranty does not apply to damage that Matco determines 
to be caused from repairs made or attempted by anyone other 
than Matco authorized Repair centers . Misuse, abuse, normal 
wear and tear, and lack of maintenance do not constitute 
warranty .

MATCO 20V

+

 5Ah LITHIUM-ION BATTERY 

MCL2050LB / CHARGER MCLCHRG6

Matco Tools warrants its 20V

+

 5Ah Lithium-ion (battery/

charger) to be free from defects in material and workmanship 
for a period of (2) years from the original date of purchase . 
Registration is required through your local authorized Matco 
distributor and/or by submission of completed registration form 
included with the product . If the battery/charger should fail 
within the warranty period, it must be returned and analyzed by 
VIS Repair and Service for the United States or HT Pneumatic 
Rebuilders for Canada at the addresses listed below, freight 
prepaid . A battery capacity defect could be defined as the 
battery no longer accepting a charge, or holding a charge for 
the battery manufacturing specified period as determined by 
Matco Tools Repair center . Based on the evaluation, Matco 
Tools, at their discretion, will either repair or replace any 
batteries to be found defective in material or workmanship at 
no charge . Please see Matco Battery Care Guide in the Cordless 
Operating Manual for any of the Infinium products . You will find 
helpful tips that may maximize the useful life of your battery .

Address for Returns as follows:

VIS Repair and Service

315 Hawkins Rd .
Travelers Rest, SC 29690
(864) 660-8286

HT PNEUMATIC REBUILDERS

22 Goodmark Place Unit #8
Toronto, ON M9W 6R2 Canada
(416) 231-0172

MATCO CORDLESS WARRANTY

Summary of Contents for MCL20G




















Reviews: