manualshive.com logo in svg

Matador Radiant Pro, Instruction Manual

Share
Download
Matador Radiant Pro Instruction Manual Download Page 47

 47

MATADOR INSTRUCTION MANUAL

Warranty

WHAT IS NOT COVERED

•  Removal or re-location costs.
•  Liability will only be accepted for loss or damage during transit if at the time the product was being 

transported by Bunnings or a Bunnings approved contractor.

•  Lack of maintenance, abuse, neglect, misuse, accidental or improper installation of this appliance. 
•  Scratches, dents, surface rust, discolouration caused by heat, abrasive chemical cleaners or chipping or 

porcelain enamel parts.

•  Damage caused by exposure to the elements such as weather, hail, insects, grease and fat fires.
•  Rusting of the cooking or charcoal grate.
•  Cleaning and wear and tear.
•  Commercial use of this product.
•  Unauthorised modifications or repairs during the warranty period.
•  The battery included with the Air Controller.
•  Pit Probes and Meat Probes
•  Charging Cable

FOR TECHNICAL ASSISTANCE

Refer to the troubleshooting section of this operating manual or contact the Mayo Hardware through the below 
details:
Phone (Aus) 1300 360 211
Phone (NZ) 09 416 6240
Email: [email protected]  

FOR SPARE PARTS

Contact Mayo Hardware through the below details:
Phone (Aus) 1300 360 211
Phone (NZ) 09 416 6240
Email: [email protected] 

Summary of Contents for Radiant Pro

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands