manualshive.com logo in svg

Matador Radiant Pro, Instruction Manual

Share
Download
Matador Radiant Pro Instruction Manual Download Page 45

 45

MATADOR INSTRUCTION MANUAL

Warranty

MATADOR WARRANTY*

Thank you for purchasing one of our quality Matador BBQs.

YOUR MATADOR BBQ IS COVERED AGAINST BURN THROUGH AND RUST THROUGH OF THE FIRE BOWL 
AND LID FOR A PERIOD OF 10 YEARS, FOR PARTS AND LABOUR, REPAIR OR REPLACEMENT.
THIS WARRANTY EXCLUDES SURFACE RUST AND DAMAGE CAUSED BY ABUSE AND NEGLECT.

ALL PLASTIC PARTS ARE WARRANTED FOR A PERIOD OF 5 YEARS, FOR PARTS AND LABOUR REPAIR OR 
REPLACEMENT. THIS WARRANTY EXCLUDES FADING AND DISCOLOURATION, AND DAMAGE CAUSED BY 
ABUSE OR NEGLECT.

THE ELECTRONIC FAN CONTROLLER IS WARRANTED FOR A PERIOD OF 12 MONTHS (EXCLUDING 
THE BATTERY, CABLE AND PROBES). THIS WARRANTY EXCLUDES DAMAGE CAUSED BY ABUSE AND 
NEGLECT. THE CONTROLLER MUST BE STORED INDOORS AT ALL TIMES WHEN NOT IN USE OR WHEN 
CHARGING.

ALL OTHER PARTS ARE WARRANTED FOR A PERIOD OF 2 YEARS, FOR PARTS AND LABOUR REPAIR OR 
REPLACEMENT. THIS WARRANTY EXCLUDES DAMAGE CAUSED BY ABUSE OR NEGLECT.

CONDITIONS OF THE WARRANTY

•  The BBQ must be operated and maintained in accordance with the instructions supplied in the                   

operating manual.

•  Any repair does not extend the warranty period.
•  Any parts other than original Matador parts will void this warranty.

THIS WARRANTY IS GIVEN BY:

Mayo Hardware Pty Ltd
ABN 73 000 032 806
4 Secombe Place
Moorebank 
NSW 2170 
Australia
www.mayohardware.com.au

Phone (Aus) 1300 360 211
Phone (NZ) 09 416 6240
Email: [email protected]  

REGISTERING YOUR BBQ FOR WARRANTY

We recommend you register your Matador BBQ for potential warranty claims. 
Record the below information and email a copy of the details together with a copy of your purchase receipt to 
[email protected]  

Summary of Contents for Radiant Pro

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands