Matador Radiant Pro, Instruction Manual

Page: 22 / 48

Assembly Instructions
8.1 Place the bent tabs of the Fire Bowl Air Damper (8) through the hole in the bottom of the Fire Bowl (7).
8.2
Rotate the Damper (8) until the tab with the slotted hole is facing the opening in the Ash Catcher Ring (13)
where the Air Vent Handle (9) will come through.
8.3
Place the Air Vent Washer (10) over the tabs of the damper protruding through to the bottom of the Fire
Bowl. Have the slot detail on the washer also facing out towards the opening in the Ash Catcher Ring (13)
(See image B).
8.4 Thread the Air Vent handle (9) through the slot opening on the Ash Catcher Ring (13) and into the tabs of
the Fire Bowl Air Damper (8). The Air Vent Washer should be captured between the Air Vent Handle (9) and
the Fire Bowl (7) (See images B and C).
8.5 Align the locking key detail on the Air Vent Handle (9) and the slotted hole on the front protruding tab of
the Damper (8).
8.6 Push the Air Vent Handle (9) until it stops against the Damper tabs.
8.7 Rotate the Air Vent Handle (9) 180 degrees until a click sound is heard and you have locked it in place
(See image D).
Step 8 - Bottom air vent assembly