Matador Radiant Pro, Instruction Manual

Page: 33 / 48

33
MATADOR INSTRUCTION MANUAL
Controller Power
Power source
Power Cord Input
5V USB Wall
Adaptor
(Not supplied)
Power Cord
The Radiant Pro Air Controller is powered by a rechargeable 3.7V lithium Ion battery which allows your
controller to operate independently of a power cord. For longer cooks you can connect the unit directly to a
low voltage adaptor for constant power.
IMPORTANT: DO NOT STORE YOUR AIR CONTROLLER ON YOUR BBQ. REMOVE AFTER EACH COOK
AND STORE INDOORS TO PROTECT IT FROM MOISTURE AND DEBRIS INGRESS.
MIN
1AMP
Charging the Air Controller
• To charge the Air Controller you will need a 5V USB Wall Adaptor (not supplied) that has a minimum
output of 1 AMP.
• Insert the power cord into both the bottom of the Air Controller and the wall adaptor.
• Whilst the Air Controller is charging, the power status icon on the unit will flash until it is fully charged.
Air Controller Performance
• Under standard cooking conditions you can expect to get between 4-5 hrs of run time from your Air
Controller when being run solely on battery power. (NOTE: Differing cooking conditions will see this time
vary)
• Connect a power adaptor if you believe the battery power will expire during the cook.
• As the Air Controller is charged via a USB cable you can connect your power cord to a USB Power Bank
if desired to charge and power your unit.
• The Air Controller will power down when not active to help save battery life. Press any key (except
power) to light up LCD screen. It will stay illuminated for a period of time before shutting off to save
battery power.
Power Status Icon