EN / Mass Sine Ultra
5
1 GENERAL INFORMATION
1.1
Product description
The Mass Sine Ultra is a sine wave inverter. It converts DC
energy from the battery into AC output power.
1.2
Use of this manual
Copyright © 2015 Mastervolt. All rights reserved.
Reproduction, transfer, distribution or storage of part or all of
the contents in this document in any form without the prior
written permission of Mastervolt is prohibited.
This manual serves as a guideline for the safe and effective
use and installation of the Mass Sine Ultra:
•
For the installer this manual gives directions for the
installation, operation and commissioning.
•
For the end user, this manual gives directions for the
operation, maintenance and possible correction of minor
malfunctions.
•
Every person who works with the device should be
familiar with the contents of this manual, and must
carefully follow the instructions contained herein.
•
Store the manual in an accessible place.
1.3
Validity of this manual
This manual is valid for the following model:
Part no
Model
26024000
Mass Sine Ultra 24/4000
All the specifications, provisions and instructions contained
in this manual apply solely to the Mastervolt-delivered
standard version of a single Mass Sine Ultra.
1.4
Scope of warranty
Mastervolt assures the product warranty of the Mass Sine
Ultra during two years after purchase, on the condition that
all instructions and warnings given in this manual are taken
into account during installation and operation.
Among other things, this means that installation is carried
out by a qualified electrician, that installation and
maintenance are executed according to the stated
instructions and correct working sequence, and that no
changes or repairs may have been performed on the Mass
Sine Ultra other than by Mastervolt. The warranty is limited
to the costs of repair and/or replacement of the product by
Mastervolt only.
Costs for installation labour, shipping of the defective parts
and indirect damage are not covered by this warranty. For
making an appeal on warranty you can contact your supplier
directly, stating your complaint, application, date of purchase
and part number / serial number.
1.5
Liability
Mastervolt accepts no liability for:
•
consequential damage due to use of the Mass Sine
Ultra;
•
possible errors in the manuals and the results thereof.
1.6
Changes to the Mass Sine Ultra
Changes to the Mass Sine Ultra may be carried out only after
obtaining the written permission of Mastervolt. This is not
applicable for DIP-switches which are used for user settings.
1.7
Identification label
Figure 1-1: Example of an identification label
The identification label is positioned at the right side of the
Mass Sine Ultra, see figure 1-1.
CAUTION!
Never remove the identification label.