SAFETY PRECAUTIONS
DANGER: Remove power from the Pump System before any cleaning operation is started.
WARNING: Tubing breakage may result in fluid being sprayed from pump. Use appropriate measures
to protect operator and equipment.
Before installing tubing into the Pump Head remove power or shut off the drive. Fingers or loose
clothing could be caught in the rollers.
CAUTIONS:Tubing for use with the MASTERFLEX C/L Pump Systems is Microbore Autoanalysis Tubing. See
Appendix A for specifics. Use of tubing other than that specified will result in poor pumping
performance and/or pump system damage and voiding of applicable warranty.
Do Not pull the tubing too tight. Do not pinch the tubing to cause it to be closed off.
WARNING: PRODUCT USE LIMITATION
These products are not designed for, nor intended for use in patient connected applications; including,
but not limited to, medical and dental use, and accordingly have not been submitted for FDA approval.
TABLE OF CONTENTS
Title
Page
SAFETY PRECAUTIONS
.......................................................2
INTRODUCTION
.....................................................................3
GENERAL DESCRIPTION
.....................................................4
SETUP
....................................................................................5
Selecting Tubing Size.......................................................5
Installing Tubing in Pump Head .......................................5
Installing Panel Mount Mounting Brackets .......................6
Installing Rubber Feet ......................................................6
Connecting Primary Power ..............................................6
Backup Battery Connection..............................................6
Remote Start/Stop Connection ........................................6
OPERATION
...........................................................................7
Turning Pump System On and Selecting Direction of
Operation .........................................................................7
Setting Pump Speed ........................................................7
Priming Pump System......................................................7
MAINTENANCE
......................................................................7
Cleaning ...........................................................................7
Replacement Parts and Accessories ...............................7
SPECIFICATIONS
...................................................................8
WARRANTY
............................................................................9
PRODUCT RETURN
...............................................................9
TECHNICAL ASSISTANCE
....................................................9
APPENDIX A
Available Microbore Autoanalysis Tubing ......................10
Tubing Flow Rates..........................................................11
2
®
NORYL
— Reg TM General Electric Company
C-FLEX, PHARMED, TYGON
— Reg TM Saint-Gobain Performance Plastics Corp.
VITON
— Reg TM E.I. duPont DeNemours & Co.
These products are covered by one or more of the following U.S. and
corresponding foreign patents: D605,286S.
Trademarks bearing the ® symbol in this publication are registered in the U.S.
and in other countries.
PUMP FOR LIQUIDS
ORIGINAL INSTRUCTIONS
