4
®
The
MASTERFLEX C/L Pump System,
Figure 1,
is enclosed in a plastic 1/4 DIN
Case.
Rubber Feet, supplied with the unit, can be
attached to the bottom of the Case for
operating on a bench or other flat surface
and for stability when stacking multiple units.
The enclosure allows panel mounting using
optional Mounting Brackets (see Accessory
Section for Part No. and page 6 for mounting
instructions).
The Pump System accommodates one tube
at controlled speeds as low as 1.7 rpm.
Tubing is held in place by spring-loaded
Tubing Retainers. For a list of tubing sizes
for use with the Pump System, refer to
Appendix A.
The self-closing Occlusion Bed allows quick
loading or changing of tubing. The Pump
Head Rotor contains four rollers for
minimum pulsation. All units operate from
an External DC Power Supply. The AC
models are supplied with a Universal
Power Supply, which provides a DC
output for connection to the Pump Drive.
The
single-turn, adjustable Speed
Control,
Figure 2,
provides variable flow -
operation. The green PWR On indicator
lights whenever the pump is operating. The
Power On/Direction Switch turns power on
when either clockwise or counterclockwise
pump rotor direction is selected. The MAX
Button is used for priming and purging and
operates the pump at maximum speed while
depressed.
Figure 2. Pump — Front Panel
GENERAL DESCRIPTION
Figure 1. MASTERFLEX C/L Pump System
Pump
Assembly
PWR On
Indicator
MAX: Press and hold to
prime or purge pump
Speed Control: Provides
variable flow adjustment
Power On/Direction
Switch
Bezel
1/4 DIN Case
Mounting
Bracket
(not Supplied)
Universal
Power Supply
