MasterCraft 2013 XStar Owner'S Manual Download Page 73

Page: 73 / 466

2021 OWNERS MANUAL /

NXT22

FEATURES

01.

Navigational light

02.

Anchor storage compartment

03.

Bilge thru-hull

04.

Ballast thru-hull vents

05.

GPS antenna

06.

Walk-thru door (where equipped)

07.

Cleat (where equipped)

08.

Mirror

09.

Stereo control (on dash, where equipped)

10.

Instrument panel (see Video Screen and
Switches information for details)

11.

Circuit breaker panel (access under helm)

12.

Tilt steering wheel

13.

Shifter/throttle control

14.

Emergency safety stop switch

15.

Fire suppression unit manual override

16.

Adjustable driver’s seat

17.

Access to center ballast pumps

18.

Cooler (beneath seat)

19.

Sea strainer (where equipped, in engine com-
partment)

20.

Cleat (where equipped)

21.

Ski pylon (where equipped)

22.

Fuel tank ﬁll

23.

Automatic ﬁre extinguisher (inside engine
compartment)

24.

Ballast thru-hull vent

25.

Bilge thru-hull vent

26.

Transom stereo remote (where equipped)

27.

Transom drain plug

28.

Attitude adjustment plate (where equipped,
beneath swim platform)

29.

Navigation light

30.

Courtesy light

31.

Amp (where equipped)

32.

Glove box

33.

Cleat

34.

Subwoofer (where equipped)

35.

Center drain plug (accessible under carpet)

36.

Tower tow rope attachment and light

37.

Tower (speakers, where equipped)

38.

Battery ON-OFF switch (where equipped)

39.

Hand-held ﬁre extinguisher

40.

Battery(ies)

41.

Cleat (where equipped)

42.

Storage compa access to port side
tsunami pump

43.

Ballast thru-hull vent

44.

Gen 2+ Wake Shaping devices (two devices,
one on each side)

45.

Engine exhaust (two, one on each side beneath
swim platform)

46.

Swim platform

SPECIFICATIONS

Length of Boat 22’ 0”

Width Amidship 99”

Boat Weight 4,213 lbs.

Length of Boat w/Platform 23’ 10”

Towing Length 27’ 4”

Towing Width 102”

Fuel Capacity 49 G

Maximum Capacity 14 people

or 2,312 lbs.

Bow: 4 people or 600 lbs.

Weight must be evenly distributed.

2021MCOwnerManualFINAL.indd 70

8/26/20 1:51 PM

Summary of Contents for 2013 XStar



















































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 XStar

Reviews:

Brands by name

Popular brands

MasterCraft 2013 XStar, Owner'S Manual

Search results

Summary of Contents for 2013 XStar

Reviews:

Brands by name

Popular brands