MasterCraft 2013 XStar, Owner'S Manual

Page: 298 / 466

valve connections, discharge pumps, etc. Turn off power to toilet.
Each installation is different, so amounts may vary. User discretion
is required to assure adequate protection.
Never use automotive-type antifreeze in freshwater systems.
Special Attention
Use only rapid-dissolve toilet paper with these head systems, and
only deodorant specially formulated for this type of head system.
See the manufacturer’s instructions for details. In the event that
anything from the head’s bowl or holding tank escapes, it should be
cleaned as soon as practical. Failure to clean any spillage may result
in unpleasant odors, mildew, mold and damage to the deck or other
areas of the boat. This is not covered under warranty.
Troubleshooting
If the toilet flushes but the water in bowl empties slowly or not at all,
check the discharge piping for kinks and blockages, and the macer-
ator pump for blockages. If the macerator pump makes unusually
loud noises, or continually trips the circuit breaker, then check the
pump for foreign material. If the toilet doesn’t flush after pushing
the flush switch, check the tank to see if it is full, check if the circuit
breaker has tripped and needs to be reset. If the toilet doesn’t re-
ceive water when the flush button is pushed, check the water supply
line to make sure it isn’t kinked and check the water valve screen
to make sure it isn’t blocked. If the toilet still exhibits issues, then
present the boat to and authorized MasterCraft dealer for repair.
REMOVABLE COOLERS
Models
Standard on all XStar, X, XT and NXT Series boats. Optional
upgraded cooler available for all XStar, X and XT Series models.
Purpose
The cooler allows boaters to bring food and beverage on-board for
outings and keep such items at a lower temperature than ambient
air to prevent spoilage.
2021MCOwnerManualFINAL.indd 297 8/26/20 1:53 PM