MasterCraft 200V Owner'S Manual Download Page 64 | Manualshive

Page: 64 / 146

background image

The video display gauges are programmed to perform multiple scans, read-outs and readings for the operator. Because they are more

complex than a single-action gauge, it is important for the boat operator to carefully review the functionality prior to first-time operation. The

display information can be critical to safe and enjoyable operation of the boat!

ProStar 190, ProStar 197, X-7, X-1

(Standard)

This video display in this gauge is the alpha-numeric data provided in lower half of the gauge,

through which the boat operator can toggle for performance and convenience information. Navigating
the LCD displays is simple and intuitive. The various screens may be accessed in a sequential order by
repeatedly pressing the external display button UP/DOWN to scroll through the available screens in a
continuous loop.

Note that the depth, air temperature and water temperature screens are hidden

when no sensor is connected.

Video

Display

Gauges

This section discusses the video display gauges. On some models,
information is provided via traditional gauges and switches. On many
models, however, this information (as well as some convenience and
support data described elsewhere in this owner’s manual) is given

through a video display gauge. Several different video display gauges

are mounted in the boats, depending on the model. General descrip-
tion of the functionality of the performance controls appeared in the

previous section. Please note that some refinement of these gauges

was in progress at press time. Therefore, the gauge in your boat may
have some minor variances to what is described in this manual. Mas-
terCraft strongly encourages you to review ALL instrumentation with
your authorized MasterCraft dealer prior to operating the boat for the

first time, and at any time during ownership of the boat if you are un

-

certain as to proper and applicable functionality.

The basic display sequence is:

Depth

Speed

Hours

RPM

Water (Lake) Temperature

Ambient (Air Temperature

Additional Functionality:

Setting the Shallow Alarm

• The Shallow Alarm Default is

set to OFF (0.0 ft/m).

• Scroll to the Depth display.
• Hold the external display

button down for three (3)
seconds, or until the alarm set

MasterCraft 2012 Owners Manual • Guide to Individual Models • Page 2-37

«
...
62
63
64
65
66
...
»

Summary of Contents for 200V



















































































































































Reviews:

No comments

Related manuals for 200V

Brand: whaler Pages: 88

Brand: Regal Pages: 315

Brand: Regal Pages: 326

Brand: Maxxon Pages: 6

Dufour 450 Perse

Brand: Phoenix Pages: 13

Brand: Boston Whaler Pages: 82

Brand: Grady-White Boats Pages: 74

Kayak Itiwit X100 2P

Brand: Decathlon Pages: 108

Brand: Pelican Pages: 2

Brand: FitNord Pages: 84

Brand: BENETEAU Pages: 114

Brand: Walker Bay Pages: 14

Brand: Barrus Pages: 52

XL700Y WaveRunner

Brand: Yamaha Pages: 105

XL700 WaveRunner 2003

Brand: Yamaha Pages: 117

Brand: NorthStar Pages: 2

Brand: Meridian Yachts Pages: 88

Brand: BENETEAU Pages: 116

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands