background image

Track Manager

 

It is possible to set up multiple tracks for displaying on the

 GPS 

map.  The 

Track Manager

 allows the operator to select tracks to 

“show” on the map or “hide” a map not currently in use. Operators 

can 

DELETE 

one track or “Delete All Tracks” at once.

General Troubleshooting Guide

IF...the display appears to not work or doesn’t come ON...
 

...the display could be in SLEEP mode. Touch a key on the keypad

 

 

 to activate the display.

 

...check for loose connections at the battery and display unit.

 

...check for reversed polarity on the power connections.

 

...verify that the battery has a minimum voltage of 6 volts.

IF...the display resets or goes OFF when starting the engine...
 

...check that the display supply wires are connected properly 

 

 

to the battery.

 

...verify that the battery is charged properly.

 

...check the battery for efficient starter current.

IF...the display has no backlight...
 

...contact your authorized MasterCraft dealer for assistance.

IF...the display has no keypad backlight...
 

...contact your authorized MasterCraft dealer for assistance.

MasterCraft 2012 Owners Manual • Guide to Individual Models • Page 2-53

Summary of Contents for 200V



















































































































































Reviews: