A
B
C
D
E
F
G
H
Head assembly
Base
Table/support assembly
Crank handle
Chuck
Feed handles
Rack
Column/support assembly
I
J
K
L
M
N
O
P
Rack collar
Flat washers M8
Spring washers M8
Bolts M8x25
Batteries
3 mm/4 mm Allen wrench
Chuck key
Instruction manual
A
F
J
K
L
M
N
O
P
G
H
I
B
C
D
E
UNPACKING
MASTERCRAFT
®
Drill Press is shipped complete in one box.
1. Unpacking and Checking Contents. Separate all parts from packing materials and check each
one with the “Table of Loose Parts” to make sure all items are accounted for before discarding any
packing material.
2. Remove the protective oil that is applied to table, base and column. Use any ordinary household
type grease and spot remover.
3. Apply a coat of paste wax to the table, column and machined surfaces of base to prevent rust.
Wipe all parts thoroughly with a clean dry cloth.
10" DRILL PRESS
Item No.:055-550
2-6
Instruction Manual
Toll-Free Helpline
1-800-689-9
928
V. Assembly and adjustments
WARNING:
To reduce the risk of injury, never connect plug to power source outlet until
all assembly steps are complete and until you have read and understood the entire owner’s
manual.
13
WARNING:
If any parts are missing, do not attempt to assemble the drill press, plug in power
cord or turn the switch on until the missing parts are obtained and are installed correctly.
WARNING:
To avoid fire or toxic reaction, never use gasoline, naptha or similar highly volatile
solvents.
