8
II. General safety guidelines (continued)
KEEP THIS USER’S MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE
WARNING!
Do not allow familiarity (gained from frequent use of your drill press) to become
commonplace. Always remember that a careless fraction of a second is sufficient to inflict
severe injury.
WARNING! WEAR EYE PROTECTION!
The operation of any power tool can result in foreign
objects being thrown into the eyes, which can result in severe eye damage. Always wear safety
goggles before commencing power tool operation.
WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and cement and other masonry products
• Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well ventilated area and work with approved safety
equipment, such as dust masks that are specially designed to filter out microscopic particles.
LASER SAFETY
WARNING! To reduce the risk of injury:
1. Do not stare directly at the laser beam. Eye damage may occur if you deliberately stare into the
beam.
2. The laser light beam used in this system is Class II with maximum output 1 mW and 650 nm
wavelength. AVOID DIRECT EYE EXPOSURE.
3. The laser must be used and maintained in accordance with the manufacturer’s instructions:
• Never aim the beam at any person or an object other than the workpiece.
• Do not project the laser beam into the eyes of others.
• Always ensure the laser beam is aimed at a workpiece without reflective surfaces as the laser
beam could be projected into your eyes or the eyes of others.
CAUTION!
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
RAYONNEMENT LASER. NE REGARDEZ PAS
DIRECTEMENT DANS LE FAISCEAU.
LASER RADIATION. DO NOT STARE INTO BEAM.
Longueur d’onde / Wavelength: 650 nm
Puissance maximale / Max. Output:
1 mW
Produit laser de classe II
Class II Laser Product
Conforme au règlement 21 CFR sections 1040.10e
Complies with 21 CFR 1040.10e
!
ATTENTION/CAUTION
