background image




When servicing the meter, use only specified replacement parts.
Use caution when working with voltage above 30 V AC RMS, 42 
V peak, or 60 V DC. Such voltages pose a shock hazard.
When using the probes, keep your fingers behind the finger 
guards on the probes. 
When making connections, connect the common test lead 
before you connect the live test lead. When you disconnect test 
leads, disconnect the live test lead first.
Remove the test leads from the meter before you open the 
battery cover or the case.
Do not operate the meter with the battery cover or portions of 
the case removed or loosened.
To avoid false readings, which could lead to possible electric 
shock or personal injury, replace the battery as soon as the low 
battery indicator (        ) appears.
When in Relative mode ("REL" is displayed) or in Data Hold 
mode ("  " is displayed), caution must be used because 
hazardous voltage may be present.
Do not use the meter in a manner not specified by this manual 
or the safety features provided by the meter may be impaired.
Adhere to local and national safety codes. Individual protective 
equipment must be used to prevent shock and arc blast injury 
where hazardous live conductors are exposed.
To avoid electric shock, do not touch any naked conductor with 
your hand or skin, and do not ground yourself. 
Do not use the supplied test leads with other equipment.
Do not use the meter if your hand or the meter is wet. 
When an input terminal is connected to dangerous live potential, 
it is to be noted that this potential can occur at all other terminals!

model no. 052-0052-2  |  contact us 1-800-689-9928

3

WARNING

Summary of Contents for 052-0052-2









































































Reviews: