8
www.mastercool.com
functions can also be performed with the electronic scale as you will discover during the operating procedures.
Either standard or metric units of measure can be selected.
WARRANTY
This product is warranted against any defect in materials and/or construction for a period of 1 (one) year from
the date of activation.
The machine is automatically activated upon initial startup. This activation will record the date and time your
machine is turned on and establishes the warranty. Please reference the serial number and tag number in any
warranty requests. This information can be found by pressing the >> on the middle, left side of the command
center to access the main menu, then selecting help.
The warranty consists of free-of-charge replacement or repair of defective component parts or parts considered
defective by the Manufacturer. Reference to the machine serial number must be included in any requests for
spare parts. This warranty does not cover defects arising from normal wear, incorrect or improper installation, or
phenomena not inherent to normal use and operation of the product.
NOTE:
Regarding the above, the Manufacturer reminds the Customer that according to international and national
laws and regulations in force the goods are shipped at the sole risk of the latter and, unless otherwise specified
in the confirmation of order phase, the goods are shipped uninsured. The Manufacturer therefore declines any
and all responsibility in merit of CLAIMS for damages due to shipping, loading and unloading, and unpacking.
The product for which repair under guarantee is requested must be shipped to the manufacturer under the
customer’s exclusive responsibility and at the customer’s exclusive expense and risk. In order to avoid damage
during shipping for repairs, the Manufacturer’s original packing must always be used.
The manufacturer declines any and all responsibility for damage to vehicles on which recovery/recycling and
recharging are performed if said damage is the result of unskillful handling by the operator or of failure to
observe the basic safety rules set forth in the instruction manual.
The warranty will expire automatically at the end of the 12 month period or whenever one of the following
occurs: failure to perform maintenance; use of improper maintenance procedures; use of unsuitable lubricants
and/or tracer fluids; inept or improper use; repairs performed by unauthorized personnel and/or with non-
original spare parts; damage caused by shocks, fires, or other accidental events.
All warranty information referenced is valid in the United States only. For information pertaining the warranty
outside of the United States, please contact your local distributor.
GENERAL INFORMATION
Machine identification information is printed on the data
plate on the rear of the machine (Figure 1). Overall machine
dimensions:
Height: 45.3” (1150 mm)
Width: 23.6” (600 mm)
Depth: 30.3” 770 mm)
Weight: 190 lb (86 kg)
Like any equipment with moving parts, the machine inevitably
produces noise. The construction system, paneling, and
special provisions adopted by the Manufacturer are such that
during work, the average noise level of the machine is less
than 70 dB (A).
NOTE:
The machine is intended for indoor use only.
PRINCIPLES OF OPERATION
In a single series of operations, the machine permits
recovering and recycling refrigerant with no risk of release
Data
Plate
FIG. 1
into the environment, and also permits purging the A/C system of humidity and deposits contained in the oil.
The machine is equipped with a built-in evaporator/separator that removes oil and other impurities from the
refrigerant recovered from the A/C system and collects them in a container for that purpose. The fluid is then
filtered, recycled and returned to the tank installed in the machine. The machine also permits running certain
operational and leak tests on the A/C system.
Summary of Contents for COMMANDER4000
Page 2: ......
