Master MSPG-6100L, User Manual

Page: 42 / 117

MASTER CO., LTD Programmable Video Signal Generator
42 page
(30) DPMS_Vsync (On = 0, L_Off = 1, H_Off = 2)
DPMS is a mode for power saving at the monitor. [On = 0 : Sending the Vertical sync
normally, L_Off = 1 : Does not send the Vertical sync by Low voltage = 0v, H_Off = 2 :
Does not send the Vertical sync by high voltage= 5v]
(31) DVI Out (D&A=0, Digital=1, Analog=2)
Selecting the DVI output signal. [0=Digital & Analog, 1=Digital, 2=Analog]
(32) DVI Out (Full=0, Limit=1, RBLv240=2)
Setting of the Digital output signal to Full/Limit Range. [Full=0, Limit=1, RBLev240=2]
(33) LVDS Format Out Data Bit (8~16)
Setting of Digital Data bit. (8Bit~16Bit available)
(34) HDCP ON(D) (0=Off, 1=On, 2=Info On)
HDCP OSD On/Off while screen output.(D : Dual)
(35) HDCP ON(S) (0=Off, 1=On, 2=Info On)
HDCP OSD On/Off while screen output.(S : single)
********************************************* HDMI Mode ********************************************
(25) Aspect Ratio (4:3=0, 16:9=1)
Setting of info frame data, 4:3 or 16:9
(26) HDCP On (0=Off, 1=On, 2=Info On)
The function of HDCP On/Off, and set up the HDCP Info OSD.
(27) Color Space( RGB=0, 601=1, 709=2)
Set of color Matrix Format.
(28) RGB444=0, Ycbcr444=1, Ycbcr422=2
Set of output Data Format.
- RGB444=0 : This signal is incarnate by only RGB Data without Y.
- Ycbcr444=1: The express method as base on the Y, Cb, Cr
- Ycbcr422=1: The express method as base on the Y, Cb, Cr