Master MSPG-6100L, User Manual

Page: 47 / 117

MASTER CO., LTD Programmable Video Signal Generator
47 page
(35) Scart Monitoring (0=same, 1=return)
Same: Output the same signal except RF mode by TV & MONITORING port.
Return: TV port for normal signal and MONITORING port for returning signal output.
(36) Wss Aspect Ratio Control (0-7)
In television technology, Wide Screen Signaling (WSS) is a digital stream embedded in
the TV signal describing qualities of the broadcast, in particular the intended aspect ratio of
the image. This can be used by a wide screen TV to switch to the correct display mode.
***How to set WSS***
ⓐ
Push Pattern key and then input No.670 enter.
ⓑ
Push Time key and then input No.2 enter.(or default no.954).
ⓒ
Push Edit key and then input password 8880. Push enter key.
ⓓ
Push enter key again and then push key of LCD panel.
ⓔ
Move cursor to option no.36 “WSS ASPECT RATIO CONTROL”
ⓕ
Push Shift key and then WSS EDIT MODE will be shown as below.
<WSS EDID MODE>
BIT 0 1 2 3 4 5 6 7 8 9 A B C D
VAL 1 0 0 0 0 0 0 0 0 0 0 0 0 0
<ASPECT RATIO BIT 0-3 SET>
0. B[0:3]0001 4:3 576 Line FULL FORMAT
1. B[0:3]0001 14:9 504 Line CENTER
2. B[0:3]0001 14:9 504 Line TOP
3. B[0:3]0001 16:9 430 Line CENTER
4. B[0:3]0001 16:9 430 Line TOP
5. B[0:3]0001 20:9 CENTER
6. B[0:3]0001 14:9 576 Line FULL FORMAT
7. B[0:3]0001 16:9 576 Line FULL FORMAT
ⓖ
The desired options can be set using the front arrow key.
But No.8 bit must set up to 1.
ⓗ
After set pressing, push Shift key then you can get out of the WSS EDIT MODE.
ⓘ
Push Enter key and then set WSS option will be printed.
This time phrase appears “Save Time Number”, if you want save edited option value
then you can save at 1~500 in an empty street.