Master MSPG-6100L, User Manual, Page: 19 / 117

MASTER CO., LTD Programmable Video Signal Generator
19 page
This key for HDMI 1.4 Part of PCB Board.
User can use HDMI1.4 function as push this key after then activity.
This is only HDMI Functionality (Output only).
If you On this Button ready for HDMI, CEC connection, else Disconnect the
HDMI, CEC.(Media player adapted auto CEC check.
The key for setting up the Media display ratio.
(1) Set the Buzzer On/Off
(2) Setting Sync output level : from 3000 to 5500mV per 100mV
(3) RS-232C Baud Rate : No.1 : 4800 / No.2 : 9600 / No.3 : 19200 / No.4 :
38400 / No.5 : 57600 / No.6 : 115200 / No.7 : 230400 / No.8 : 460800
(4) Data Bit : 8bit, 7bit
(5) Stop Bit : 1bit, 2bit
(6) Parity : Non, Even, Odd
(7) Data set up : This is option. When you use RS-232C
Communication to use either select Y Level(0~100%) of
pattern or 0~255.
(8) Data Size set up : This is option to use either select pattern Size(0~100%)
of window inner BOX or H/V.
(9) EDID Block Read set up : Set up the part of EDID Block for read(0~4).
(10) Old Edit Passwords : Input of established store password.
(11) New Edit Password : Input of new password(Before input new password,
you should store old password).
(12) HDCP Display set up : HDCP OSD’s set up to Pass or OK.
(Normal -> HDCP Pass OSD.SAMSUNG -> HDCP OK OSD)
(13) HDCP Retry On set up :
Off -> HDCP fail case : HDCP authorization runs until 5times and then not
try to authorization option.
On -> HDCP fail case : HDCP authorization runs until success.
(14) HDMI Lip Sync set up : HDMI Lip Sync On/Off set up.
(15) AV MUTE set up :
When HDCP Fail case’s that Audio and Video Display /Clear.
(16) Image set up : Set the output speed of output option images.
Speeds up the rate set by FPGA.