Master MSPG-6100L, User Manual

Page: 41 / 117

MASTER CO., LTD Programmable Video Signal Generator
41 page
(20) Number of EQP Pulse (Back, EA)
Select the number of EQP pulse in Vertical back porch.
(21) Audio Pattern Number
Select audio pattern format.
(22) Video Pattern Number
Select video pattern format.
(23) Video Level (mV)
Set the default level of video output.
(24) Model Name
Set the model name.
********************************************** PC Mode **********************************************
(25) Sync On Green (Y/N)
Set up the G(Green) Video added horizontal, vertical sync frequency or not. [Y: send
Sync, N : does not send Sync]
(26) HS Out Terminal <= CS (Y/N)
Set the Horizontal Sync port, with adding Vertical Sync or not. [Y:Send Vertical Sync,
N:Does not send Vertical Sync]
(27) VS Out Terminal Off (Y/N)
Set the Vertical Sync port, with adding Vertical Sync or not. [Y:Send Vertical Sync,
N:Does not send Vertical Sync]
(28) DPMS_Video (On=0, Off=1)
Selecting the video signal output or not, when the DPMS is operating. [On=0:Sending the
Video Signal, Off=1: Does not send the Video Signal]
(29) DPMS_Hsync (On = 0, L_Off = 1, H_Off = 2)
DPMS is a mode for power saving at the monitor. [On = 0 : Sending the Horizontal sync
normally, L_Off = 1 : Does not send the Horizontal sync by Low voltage = 0v, H_Off = 2 :
Does not send the Horizontal sync by high voltage = 5v]