6
EN
FIG-5
Assembling left board
FIG-6
Latching
7.
The latch has a guide tab that must be placed in the guide slot for alignment. Pick up the back panel (hold it
upright to the floor panel) and place the tab in the slot, do not latch at this time. When the back wall and the front
wall/side wall are set together on the floor panel, close and latch it.
See Figure 6
FIG-7
Assembling right board
FIG-8
Assembling sitting board’s support
8. Align the right board with bottom board’s corresponding battens; make sure right board fits flush into
backboard and latch together.
See FIG-6 and FIG-7
9. Slide the sitting baffle down vertically into the slot within left and right panel. Next, connect the bench’s heater element
wire to corresponding wire from the back wall, then locate sitting baffle and slide into place
.
See Figure 8,9
Note:
Make sure the wires are connected tightly, otherwise the heater will not work.
FIG-9
Connecting wire
FIG-10
Assembling sitting board
