Master MAS-F07, User Manual

Page: 63 / 95

24
EN
27. Install the treadmill on a flat level surface with a stuitable volt/Hz which marked in the
machine label, grounded outlet.
28. Allowed temperature: 5 to 40 degrees. If the treadmill has been exposed to cold
temperatures,allow it to warm to room temperature before turning on the power.If you do
not do this, you may damage the console displays or other electrical components.
1.1 IMPORTANT ELECTRICAL INFORMATION
WARNING!
NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill.
Route the power cord away from any moving part of the treadmill including the
elevation mechanism and transport wheels.
NEVER remove any cover without first disconnecting AC power.
1.2 IMPORTANT OPERATION INSTRUCTIONS
Understand that changes in speed and incline do not occur immediately. Set your
desired speed on the computer console and release the adjustment key. The
computer will obey the command gradually.
Use caution while participating in other activities while walking on your treadmill;
such as watching television, reading, etc. These distractions may cause you to
lose balance or stray from walking in the centre of the belt; which may result in
serious injury.
In order to prevent losing balance and suffering unexpected injury,
NEVER
mount or dismount the treadmill while the belt is moving. This unit starts with a
very low speed. Simply standing on the belt during slow acceleration is proper
after you have learned to operate this machine.
Always hold on to handrail while making control changes.
A safety key is provided with this machine. Remove the safety key will stop the
walking belt; the treadmill will shut off automatically. Insert the safety key will
reset the display.
Do not use excessive pressure on console control keys. They are precision set to
function properly with little finger pressure.