Master F-15, Owner'S Manual

Page: 73 / 112

DE
It shows speed. (range:1km/h-16km/h ）
(12)“cal/pro” window
It shows calorie. (range:0-999 calorie
）
(13)“distance” window
It shows the distance.(range:0 km-9.99km)
(14)“time” window
It shows time.
（
range:00:00 -99:99
）
(15) “incline” window
It shows incline. (range:1-16% ）
(16)“ music” button
Press this button, play music; while press it again, music stops.
4.2 Getting Started
Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power switch located at
the front of the treadmill below the motor shield. Ensure that the safety key is installed, as the treadmill will not
power on without it. When the power is turned on, all the lights on the display will light for a short time.
4.3 Self-Checking
When using for the first time, it is necessary to make the machine carry on self-check:
 Remove the safety key, press MODE and hold, then insert the
safety key again, the machine enters into self-checking state. During this state, pressing START/STOP can
terminate the self-checking.
4.4 Quick-Start Operation
1. Press and release the START/STOP to wake display up (if not already
on). Note: Installing the safety key will also wake up the console.
2. Press and release the START/STOP to begin belt movement, at 1.0 Km/hr, then adjust to the desired speed
using the ‘+’ or ‘-’. You may also use the rapid speed keys (3, 6, 9 and 12) to adjust the speed. The speed
range is from 1.0km/h to 16.0km/h. You can also use ‘+’ or ‘-’to adjust the speed on handrail.
3. To slow the treadmill down, press and hold the ‘ - ’ key to desired speed. You may also press the rapid
speed adjust keys: 3, 6, 9, 12.