Master Spas Bar Harbor Owner'S Manual Download Page 60

Page: 60 / 72

America’s Leader In Luxury

M A S T E R S P A S

DOLPHIN REMOTE

Setup Key: (F)

Use this key to program device codes and
sequences (see page 61).Your Dolphin Remote
has been preprogrammed at the factory for all
components included.When the batteries are
replaced, these components need to be
reprogrammed.

Device Mode Keys: (G)

Select unit to control by pressing device key
once. The TV, DVD, CD, and (if applicable)
CBL/SAT buttons are used on the FST spa.

Directional Keys: (H)

These keys will scroll through "Menu"

options in the DVD device mode.

Numeric Keypad: (I)

These keys will change the TV channel
manually in the DVD device mode.

In the CD device mode, #1 on the keypad
will change / serve as the "MODE" select
feature on the Sony CD Player.

NOTE:

If utilizing a satellite decoder, it is

necessary to point the Dolphin Remote
directly at the decoder.

MS Owners Manual 12/5/03 2:05 PM Page 60

Summary of Contents for Bar Harbor









































































Search results

Summary of Contents for Bar Harbor

Reviews:

Related manuals for Bar Harbor

Brands by name

Popular brands

Master Spas Bar Harbor, Owner'S Manual

Search results

Summary of Contents for Bar Harbor

Reviews:

Related manuals for Bar Harbor

Brands by name

Popular brands