background image

America’s Leader In Luxury

M A S T E R   S P A S

57

Your FST spa (and any spa with a stereo) comes equipped with a locking,
water resistant enclosure for the DVD player and stereo.

We have installed an F-81 television coaxial cable connector located under the
front panel for your convenience.This can be utilized if you wish to add a cable
connection or satellite connection to your FST.

Note: Due to the brightness of daytime light, it may be difficult to view the TV
during daytime hours. Please consider this when placing your spa outdoors. It
also may be difficult to operate the dolphin remote due to UV rays.

Note:To play a DVD, you must remove any CD’s from the stereo.

FLAT SCREEN TV (FST) / STEREO SYSTEMS (continued)

STS, LS 750 FST, and LSX 1050

WARNING:

Never remain in your spa longer than 15 minutes per session when the
water temperature is above 98˚ F. If you wish to spend more time in your
spa, whether enjoying music, watching tv, or just lounging, be sure to keep
the spa water at or below body temperature (98.6˚ F).

MS Owners Manual  12/5/03  2:05 PM  Page 57

Summary of Contents for Bar Harbor









































































Reviews: