Master Spas Bar Harbor Owner'S Manual Download | Manualshive

Page: 1 / 72

background image

America’s Leader In Luxury

M A S T E R S P A S

Thank you for choosing your new spa built by Master Spas. Please read the
entire Owner’s Manual before installing and using your spa. The goal of this
manual is to provide you with safety and operational information plus some tips
that will help you enjoy your spa to its fullest.

At the time of print, this manual is accurate in its information. Master Spas
reserves the right to change or improve its product without prior notice.
To check on updates or for other information, please visit www.masterspas.com
and follow the links to the customer service section.

1

MASTER SPAS OWNER’S MANUAL

Welcome To Ultimate Relaxation!

The serial number for your spa is located in the filter area, on the spa system
pack, or on the UL plate on the skirting. It will start with "M" followed
by a 6-digit number.

Ex. M404590

6927 Lincoln Parkway
Fort Wayne, Indiana 46804
260-436-9100
www.masterspas.com

*Serial Number Location

Name _____________________________________________________

Address ____________________________________________________

City _____________________________ State ______ Zip ___________

Date Purchased ______ /______ /_______

Model ________________________ Serial #______________________

Dealer Name _______________________________________________

Phone # (______)________-__________

Service Tech Rep_____________________________________________

Record Of Ownership

MS Owners Manual 12/5/03 1:56 PM Page 1

1
2
3
...
»

Summary of Contents for Bar Harbor









































































Reviews:

No comments

Related manuals for Bar Harbor

Brand: Access Tubs Pages: 26

Brand: Guangzhou J&J Sanitary Ware Pages: 15

Brand: Jacuzzi Pages: 2

Brand: Caldera Pages: 44

Brand: Jacuzzi Pages: 43

Signa 5 Whirlpool Bath and Soaking Bath 9625

Brand: Jacuzzi Pages: 2

Brand: Jacuzzi Pages: 2

Brand: Penner Manufacturing Pages: 17

Brand: Coast Spas Pages: 32

Brand: Coast Spas Pages: 38

LUXURY 2022 Series

Brand: Coast Spas Pages: 49

Brand: Coast Spas Pages: 57

Brand: Riptide Pages: 24

Brand: Wellis Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands