13
DO NOT DIVE.
102
DO NOT DIVE.
GLOSSARY OF SWIM SPA TERMINOLOGY
18. SECONDARY THERAPY PUMP
(if equipped)
This produces water flow through 1 to 2 groups or seats of jets in the swim spa. The second
pump operates similar to the main pump and is controlled by the “Jets II” or “Aux” button
on the Topside Control Panel.
19. THIRD THERAPY PUMP
(if equipped)
This produces water flow through 1 to 2 groups or seats of jets in the swim spa. This is con-
trolled by the Jets III button on the Topside Control Panel.
20. CIRCULATION PUMP
(if equipped)
This produces water flow through the heater in the swim spa and provides the water flow
necessary to actuate the ozone injector. This energy efficient pump runs 24 hours for efficient
filtration and heating.
21. PUMP UNION
These are used to help relieve possible pump air locks or for service personnel to easily service
the pumps.
22. HEATER UNION
These are used by service personnel to easily service the heater.
23. SWIM SPA LIGHT
The on/off control for the lighting in your swim spa is located on the spa end topside control panel.
24. EXERCISE JETS
(H2X Swim Spas)
These large jets are grouped at the end of your swim spa to offer water flow for exercising
against. A jet diverter valve may control the flow for these jets.
25. SWIM SPA JUNCTION BOX
(MP Swim Spa Only)
The internal junction box for connecting your electrical service(s) to the spa is located behind
and accessible by removing access panels “B” and “A”.
26. PROPULSION SYSTEM ACCESS
(MP Swim Spa Only)
The propulsion control system of the MP Swim Spas is located behind the skirt panel desig-
nated as “E” in the access panels drawing. The propulsion motor, propulsion control pack,
and pulleys for the system are located in this area.
27. PROPULSION SYSTEM CONTROL PANEL
(MP Swim Spa Only)
You may safely control the speed of the propulsion system from the inside of your swim spa
by using the buttons on the control panel mounted in the swim area. This control panel is
used to turn the propulsion system on and off and to adjust the intensity of the water flow.
Your swim spa may have one of three propulsion systems depending on the equipment
option: Wave, Wave XP, or Wave XP Pro. All three systems operate in the same manner using
the control panel mounted on the swim end of your swim spa. This control panel may be
safely used from inside or outside of the swim spa to operate the propulsion system.
MasterSpaParts.com
