![background image](http://html.mh-extra.com/html/massoth/dimax-1203b/dimax-1203b_manual_1735943009.webp)
MASSOTH
3.5 Hook up of Control Components
The DiMAX
®
1203B Digital Booster features two terminals on the front panel. These terminals
may be utilized to connect a Central Navigator (see note page 2), DiMAX bus components as
e.g. feedback module, train detector, or the DiMAX transducer to the DiMAX
®
1203B Digital
Booster. The DiMAX transducer will enable you to use LGB MTS II components with the Di-
MAX system.
The Master terminal is reserved for the Central-Navigator (see note page 2) only!
The Slave terminal may be used as a regular control bus terminal for DiMAX components.
These terminals may only be used for the operation of a Central-Navigator (see note page
2) in conjunction with DiMAX components!
A regular Navigator does not work, when connected to this jack!
3.6 Hook Up with a DiMAX
®
, LGB
®
oder Lenz
®
central station (or compatible)
The rear panel (Illustr. 2) provides two options for connecting bus components.
The DiMAX
®
1203 Booster may be connected to a Lenz
®
central station (or compatible) with
the 3-pole Lenz
®
CDE jack.
DiMAX
®
1203B Digital Booster
8
Illustration 5: Control Bus Terminals and Reset/Mode-Keys