![background image](http://html.mh-extra.com/html/massoth/dimax-1203b/dimax-1203b_manual_1735943014.webp)
MASSOTH
5.1 Connecting the outputs in parallel
Parallel use of output channels is only possible in Mode 1 (Booster) !
You may connect 2 or 3 output channels in parallel to increase the output Amperage. Combi-
ning two outputs delivers 7 Amps continuously, three outputs deliver approx. 10 Amps conti-
nuously.
Important: The channels need to be connected in the same polarity! Otherwise com-
ponents connected to the DiMAX 1203B might be damaged or destroyed as well as the
booster itself.
The wiring diagram is shown in illustration 9.
The section points may be crossed without hesitation operating DiMAX
®
or MZS II resp.III
central stations in connection with the DiMAX
®
1203B booster.
13
DiMAX
®
1203B Digital Booster
Illustration 9: Wiring diagram for parallel operation of 3 channels in mode 1