manualshive.com logo in svg

Massoth DiMAX 1203B, Manual, Page: 24 / 24

Share
Download
Massoth DiMAX 1203B Manual Download Page 24

MASSOTH 

8.

Technical Specifications

Input Voltage: 12 – 18 V AC / 14 – 24 V DC

Output Voltage: max. 22V DCC / adjustable from 14 to 22V DCC (with AC input only)
Input Amperage: continuous 10 A / max. 12 A

Output Amperage operating the stages separately: continuous 3 x 3,5 A / max. 3 x 4 A
Output Amperage in parallel operation: continuous 10 A

Operating Temperature: 0°...122C°
Measurements: 170 x 100 x 245 mm

Weight: approx. 2,2 Kg
 

This product conforms to the CE standards

RoHS

This product is manufactured according to the latest EG Standards for lead free 
manufacturing conforming to RoHS standard.

Please dispose of according to your State regulations.

Do not dispose of in open fire.

9.

Manufacturer Information

Massoth Elektronik GmbH
Frankensteiner Str. 28

64342 Seeheim-Malchen
Germany

PH: 011-49-6151-350770
FX: 011-49-6151-3507744

Massoth Electronics USA, LLC

6585 Remington Dr., STE 200
Cumming, GA. 30040

Ph: 770 – 886 – 6670
FX: 770 – 889 – 6837

V1.0 12/07 ST

Massoth

®

 and DiMAX

®

 are registered trademarks by Massoth Elektronik GmbH, Seeheim, Germany. LGB

®

 is a registered trademark and property of its respective ow-

ner. All other trademarks printed are registered trademarks as well. No parts of this work may be reproduced or transmitted in any form or by any means, electronic or 

mechanical, including photocopying and recording, or by any information storage or retrieval system without the prior written permission by Massoth Elektronik GmbH 
unless such copying is expressly permitted by federal copyright law.

23                                                                           

DiMAX

®

 1203B Digital Booster

Summary of Contents for DiMAX 1203B

























Reviews:

No comments