Masport AMBASSADOR 80.40RBW 210, Owner'S Manual

Page: 15 / 32

15
559802 - Masport 4/6 Burner 210 Series - May 2015
Inserting/Changing the Battery
Unscrew the pulse cap assembly. Insert the battery as shown. Replace the pulse cap assembly. For single pin modules 1 X AAA battery is
required for the replacement, and for 4 / 6 / 7 pin modules 1 X AA battery is required for the replacement.
16. Place the Flame tamer (20) to the positions as in the pictures.
4 BURNER BBQS
20
6 BURNER BBQS
20
RB BURNER BBQS
20
17. Place the Cooking grill (21), Cooking plate (22), Deep dish (35 - only if applicable) and Warming rack (23) to the frame body as in the
diagrams.
Note! The cooking plate and deep dish must not be used at the same time. The barbecue is designed to operate safely
with approx 34% of the cooking surface being on an open grill.
21
22
23
21
22
23
21
23
35
For Models With Rotisserie - Assembly Instructions
Tools needed for assembly
Crosshead screwdriver, 10mm A/F spanner, 2x 8mm A/F Spanners.
18. Assemble the Prong (24), the Rod-A (25), the Rod-B (26) and the Guide (27), the Rotisserie handle (28) together as in the diagram.
Note!
Rotisserie Rod 26 is threaded LH, assemble by turning rod anti-clockwise. Tighten with
8mm A/F Spanners. This connection must
remain spanner tight.
25
24
26
27
28
Place inside of grill
Assemble the Motor holder (29) to the appliance with 2pcs Screw M6*10 (a), 2 fibre washer (c) and 2pcs Nut M6 (f) as the
diagram. Place the battery (31) into the Motor (30). Assemble the Motor and Rotisserie to the appliance as the picture.
Note!
Take note of the b - positions prior to fitting the batteries.
Note! There is an option to use a mains adaptor (not stocked). Requires:
Mains adaptor 240 volt > 3 volt DC 3 milliamps or greater.
Rotisserie
Nut M6
Fibre washer
Screw M6*12
29
30
Note!
For 210 models without a Rotisserie, there is an option to purchase 559218 Rotisserie Set-210.
Natural Gas Conversion
The 210 Series of BBQ has the option of being converted to natural gas. This conversion must be actioned by a certified agent using a
Masport NG conversion kit.
The certifying agent (usually a gas fitter or gas plumber) will update the information on the data plate to keep the barbecue compliant with
local regulations.