9
559802 - Masport 4/6 Burner 210 Series - May 2015
PREPARING THE HOOD / GRILL ASSEMBLY
Open the hood carton and remove the warming rack (item 23)
Lift up and out the polystyrene corner packing.
Remove the protective layer from the hood.
Cut open all sides with a knife taking care not to damage the hood or grill in the process.
Open the carton walls outwards and flatten. Remove the polystyrene packing from beneath the grill.
Open the hood and remove in order:
•
Packed cartons (some are empty and used as a gap filler) and any polystyrene packaging
•
Grill first, then hotplate
•
Remove the layer of cardboard
•
Remove extra feature options if any. Some specific barbecue models include some extra feature items.
•
At the rear you will locate the drip tray (item 18) remove this, (it is packed in the reverse). This may require the removal of the 2x step
Screws (item e)
•
The Hood / Grill is now ready to be lifted onto the cabinet. This is a large and heavy assembly which requires two persons to lift it
safely into position.
10. 1) Assemble the hood and grill assembly (item 14) to the cabinet trolley with 4pcs Screw (SS) M6*12 (item b) and 4pcs fibre washer
(item c) from the fastener kit.
2) In some barbecue models the knobs are not fitted to the grill then assemble 6 pcs knob (item 15) to the valve shaft on the body
assembly, as per the illusration below.
3) If the rear burner knob is not fitted to the grill assemble 1 x knob - Rear burner (item 34) to the Rear burner valve shaft.
When the Timer is OFF the flat on the
shaft faces the Bottom / 6 o’clock
position and the Flat on the knob
insert should match this position.
When the Timer is OFF the rounded shaft contour faces the
Top/ 12 o’clock position and the flat spring metal insert grips
the round face of the shaft of valve.
Screw SS M6*12
Big fibre washer
14
Screw SS M6*12
Big fibre washer
14
15
Summary of Contents for AMBASSADOR 80.40RBW 210
Page 4: ...Images ...
Page 31: ......
