background image

 

GB - 4

 

Controls and Features. . . . . . . . . . . . . .  2

Introduction . . . . . . . . . . . . . . . . . . . . . .  4

Safety  . . . . . . . . . . . . . . . . . . . . . . . . . . .  6

Assembly . . . . . . . . . . . . . . . . . . . . . . .  10

Operation . . . . . . . . . . . . . . . . . . . . . . .  11

Maintenance . . . . . . . . . . . . . . . . . . . . .  16

Service and Adjustments . . . . . . . . . .  18

Storage . . . . . . . . . . . . . . . . . . . . . . . . . 21

Troubleshooting . . . . . . . . . . . . . . . . . . 22

Specifications  . . . . . . . . . . . . . . . . . . . 23

Accessories . . . . . . . . . . . . . . . . . . . . . 24

Service Parts  . . . . . . . . . . . . . . . . . . . . 24

Warranty . . . . . . . . . . . . . . . . . . . . . . . . 25

 

THE MANUAL

 

Before operation of unit, carefully and 
completely read your manuals. The contents 
will provide you with an understanding of 
safety instructions and controls during normal 
operation and maintenance.
All reference to left, right, front, or rear are 
given from operator standing in operation 
position and facing the direction of forward 
travel.

 

MODEL AND SERIAL NUMBERS

 

When ordering 
replacement parts or 
making service 
inquiries, know the 
Model and Serial 
numbers of your unit 
and engine.
Numbers are located 
on the product 
registration form in the 
unit literature 

package. They are printed on a serial number 
label, located on the frame of your unit. 

• Record Unit Model and Serial numbers here.

• Record Engine Model and Serial numbers 
here.

 

PRODUCT REGISTRATION

 

A warranty registration card must be filled out, 
signed, and returned at time of purchase. This 
card activates the warranty. Claims meeting 
requirements during limited warranty period 
will be honored.

 

UNAUTHORIZED REPLACEMENT 
PARTS

 

Use only Ariens replacement parts. The 
replacement of any part on this vehicle with 
anything other than an Ariens authorized 
replacement part may adversely affect the 
performance, durability, or safety of this unit 
and may void the warranty. Ariens disclaims 
liability for any claims or damages, whether 
warranty, property damage, personal injury or 
death arising out of the use of unauthorized 
replacement parts.

 

DISCLAIMER

 

Ariens reserves the right to discontinue, make 
changes to, and add improvements upon its 
products at any time without public notice or 
obligation. The descriptions and specifications 
contained in this manual were in effect at 
printing. Equipment described within this 
manual may be optional. Some illustrations 
may not be applicable to your unit.

 

TABLE OF CONTENTS

INTRODUCTION

Transfer 

model & serial 

number label 

from product 

registration 

here.

Serial 
Number 
Label

OS0194

Figure 2

 

© Copyright 2001 Ariens Company

Summary of Contents for 938400-522



























Reviews: